Taizhou Chaotian Pneumatic Tools Co, Ltd. CFCAPR LOW PRESSURE SPRAY GUN CFCAPR finishing coat environmentally friendly spray gun, adopts APR(reducing atomization pressure) control technology. Using MC to produce atomized bottle cap can reduce paint rebound, make paint utilization rate reach over 65%, ensure uniform fog type and fine atomized particles. At the same time to speed up the transmission speed to meet most of the working environment and paint technical personnel use habits; We use the central wet zone stretch technology, so the whole spray width widened, and make the paint film as thin as possible, conducive to the drying of waterbased paint; Stainless steel needle nozzle has good sealing effect, wear and corrosion resistance, the main body of the spray gun is forged aluminum. The surface of spray gun is anodized, which is not only beautiful, but also easy to clean and protect. According to the actual situation, this product will use the company's invention patent, utilty model patent and appearance patent technology alone or in combination. Product Model Inside diameter of nozzle (mm) Using air pressure (bar) Air cross section flow (L/min) Spraying Distanc (cm) Width of spra (mm) FC HVLP 1.3 2.0 430 16 280 FCAPR 1.3 2.0 290 18 300 FCAPR 1.6 2.0 290 18 290 WWPAPR LOW PRESSURE SHEET METAL SPRAY GUN WWPAPR Side cup, lower cup low pressure spray gun, Widely used in wood products water paint, sheet metal paint, Not only to reduce air pressure, reduce paint rebound fly, speed up the spraying, improve the paint rate, and suitable for most of the use of environment and paint technicians use habits; Atomizing cap adopted the central wet zone stretching technology, so that the overall spray amplitude elongated, and make the paint film as thin as possible, conducive to the drying of water-based paint; Middle and low pressure atomization also contributes to the wettability of the paint film, as well as more uniform coating in grooves, cormers, corners arnd other parts, leaving no dead cormers, reducing the problem of oil accumulation and foaming; Moreover, air mixing is greatly reduced, and the generation of mechanical bubbles is reduced. Especially in the construction of water-based paint two-component products, the "prickly heat"problem is greatly improved, making it obtain excelent paint film surface effect; Stainless steel needle tip set has good sealing, rust resistance, wear resistance and corrosion resistance; The main surface of the spray gun is titanium plated, not only beautiful and generous, but also conducive to cleaning and protection. Paint viscosity (DIN4) ≤30S 30-50S Nside diameter of nozzle (mm) 1.0 1.3 50~70S 1.6 70~100S 1.8 The paint supply Spraying Distance (cm) Side Cup 18 Pressure Feed 17 Side Cup 18 Pressure Feed 17 Side Cup 18 Pressure Feed 17 Side Cup 18 Pressure 17 Using air pressure (bar) Air cross Width of section spray flow (mm) (L/min) 2.0 290 2.2 2.5 180-290 Feed ≥100S 2.0 Side Cup 18 Pressure Feed 17 CHAOTIAN LOW PRESSURE SPRAY GUN