4.1. Setting methods
VoIP Phone is different from the traditional phone; it need be set to make it active. If your VoIP
service provider asks you to set this phone, you can do it easily according to the following methods.
This VoIP Phone can be set via three different setting methods:
The phone key. The initial password is 123 for setting via phone key.
The web browser on PC
Telnet
This Manual will tell you about the setting methods via the web browser on PC.
4.2. Setting via Web Browse
When this phone and your PC are connected to your network, enter the IP address of the wan port in
this phone as the URL (e.g. http://xxx.xxx.xxx.xxx/ or http://xxx.xxx.xxx.xxx:xxxx/).
If you do not know the IP address, you can look it up on the phoneâs display by pressing the key
âSYSINFOâ.
After you enter the IP address, you will see the following web interface.
This phone provides different two privileges for different users to set it.
The two privileges are guest and administrator respectively. In guest privilege, user can see but not
modify Register/Proxy Sever Addresses and ports of SIP, advance SIP and Iax2. In administrator
privilege, user can see and modify all setting parameters.
Default value in guest privilege
Username: guest
Password: guest
Default value in Administrator privilege
Username: admin
Password: admin
Input username and password, click âlogonâ, and you will enter setting web interface.
There is a selection menu on the left side of the web interface. Click on the desired submenu; the
current settings of this submenu will be displayed in the larger field on the right. You can now modify
and store the values by using mouse and keyboard of your PC. To save the changes, click on the
submenu âmaintenanceâ and then click the â configâ button and the âSaveâ button on the right field.
4.3. Configuration via WEB
4.3.1. BASIC
4.3.1.1. Status
17
Sistemi Integrati di Telefonia VoIP
